SWMS for Tiling
Tiling SWMS for silica dust, heavy tiles and old bathrooms.
Cutting porcelain, ceramic and stone tiles releases respirable crystalline silica, and old bathrooms can hide asbestos in wall sheeting and floor tiles. Large-format tiles are heavy and awkward. A tiling SWMS has to cover the cutting method, the dust controls and the strip-out. Describe the job and the platform writes it.
- First SWMS free, no card
- Word document in about 5 minutes
- $19.99 inc. GST after that, 3 revisions included
High-risk construction work this SWMS usually covers
- 4 Likely disturbance of asbestos
- 1 Risk of a fall more than 2 m
Categories per the model WHS Regulations, s 291 (OHS Regulations 2017, r 322 in Victoria). You confirm which apply when you describe the job.
What goes in it
Typical activities, in the order you do the work
- Site arrival, induction and asbestos check before strip-out of old tiles and sheeting
- Strip-out of existing tiles, adhesive and wall linings
- Substrate preparation, levelling and waterproofing
- Tile cutting at a set-up station — wet cutting or on-tool extraction
- Mixing adhesives and grouts
- Laying, fixing and grouting
- Clean-up with wet methods or an H-class vacuum, waste removal
Each activity gets its hazards, the controls in hierarchy order (eliminate, substitute, isolate, engineering, administrative, PPE), the residual risk rating and who is responsible.
Key hazards and how they are controlled
Written as controls, not slogans
Respirable crystalline silica from cutting and grinding
Wet cutting or on-tool dust extraction, cutting outside or in a ventilated area, P2 respirator fit-tested, no dry sweeping
Asbestos in old wall sheeting, vinyl tiles and adhesives
Check register or sample before strip-out; stop work if suspect material found; licensed removal where required
Manual handling of large-format tiles and bags
Trolleys and suction lifters, two-person lifts for large tiles, smaller bag sizes, materials delivered close to the work area
Skin and eye contact with adhesives, grouts and cement
Read the SDS, gloves and eye protection, wash facilities, no skin contact with wet cementitious products
Who asks for it
Set out the way builders' safety teams expect
Builders, renovators, strata managers and commercial fit-out contractors ask for it, and many now expect the silica controls to be spelled out.
- verifiedSite address, PCBU, supervisor and contact details on the front page
- verifiedHRCW checklist ticked for the work actually being done
- verifiedYour state's WHS legislation and Codes of Practice referenced
- verified5×5 risk matrix, hierarchy of controls, emergency response and nearest hospital
- verifiedConsultation and sign-on sheet for the crew
See the output first
Email me a sample SWMS
A full 14-page example as a Word document, so you can see exactly what you'll get before you start.
Questions about a tiling SWMS
Can I still cut engineered stone?
No. From 1 July 2024 the manufacture, supply, processing and installation of engineered stone benchtops, panels and slabs is prohibited across Australia, with limited exceptions for removing, repairing, minor modification or disposal of engineered stone already installed. That work must be controlled, and the WHS regulator notified before it starts. Porcelain and natural stone are not banned but can contain silica, so cutting them still needs dust controls.
What dust controls does the SWMS include?
Wet cutting or on-tool extraction as the main control, a P2 respirator as backup, cleaning with wet methods or an H-class vacuum, and others kept out of the cutting area.
How much does it cost?
Your first SWMS is free. Every SWMS after that is $19.99 inc. GST, paid before it is generated, with up to 3 revisions included. No subscription.
Related: Asbestos disturbance SWMS · Plastering SWMS · Carpentry SWMS
Builder asked for a SWMS by tomorrow?
Describe the job tonight and it's in your inbox in minutes. First one free.
Start my free tiling SWMS arrow_forward