SWMS for Plastering

Plastering SWMS for ceilings, sheet handling and sanding dust.

Plastering is mostly ceiling work from mobile scaffolds, trestles and platforms, with heavy sheets lifted overhead and fine dust from sanding. On high or raked ceilings and stairwells there is a fall risk over 2 metres. Describe the job and the platform writes the SWMS for this building.

  • First SWMS free, no card
  • Word document in about 5 minutes
  • $19.99 inc. GST after that, 3 revisions included

High-risk construction work this SWMS usually covers

  • 1 Risk of a fall more than 2 m
  • 4 Likely disturbance of asbestos
  • 15 Movement of powered mobile plant

Categories per the model WHS Regulations, s 291 (OHS Regulations 2017, r 322 in Victoria). You confirm which apply when you describe the job.

What goes in it

Typical activities, in the order you do the work

  1. Site arrival, induction and asbestos check before removing old ceilings or linings
  2. Set up mobile scaffold, trestles or EWP to suit the ceiling height
  3. Sheet delivery, storage and distribution around the site
  4. Lifting and fixing ceiling and wall sheets using sheet lifters
  5. Setting, jointing and cornice installation
  6. Sanding with extraction
  7. Clean-up and waste removal

Each activity gets its hazards, the controls in hierarchy order (eliminate, substitute, isolate, engineering, administrative, PPE), the residual risk rating and who is responsible.

Key hazards and how they are controlled

Written as controls, not slogans

Falls from mobile scaffolds, trestles and stairwell voids

Mobile scaffold with guardrails, castors locked, on level ground; void protection over stairwells; EWP for high ceilings

Manual handling of plasterboard sheets overhead

Sheet lifters for ceilings, trolleys for moving sheets, two-person lifts, sheets stored flat and close to the work

Dust from sanding and cutting

Sanders with dust extraction, H-class vacuum, P2 respirator, ventilation, others kept out

Asbestos in old ceilings and wall linings

Check register or sample before removal; stop work on suspect material; licensed removal where required

Who asks for it

Set out the way builders' safety teams expect

Builders, fit-out contractors and renovators ask for it before ceiling work, especially on commercial sites where mobile scaffolds are used.

  • verifiedSite address, PCBU, supervisor and contact details on the front page
  • verifiedHRCW checklist ticked for the work actually being done
  • verifiedYour state's WHS legislation and Codes of Practice referenced
  • verified5×5 risk matrix, hierarchy of controls, emergency response and nearest hospital
  • verifiedConsultation and sign-on sheet for the crew

See the output first

Email me a sample SWMS

A full 14-page example as a Word document, so you can see exactly what you'll get before you start.

We'll email the sample once and may follow up to see if you need a hand. No spam, unsubscribe any time. Privacy

Questions about a plastering SWMS

Does plastering need a SWMS?

A SWMS is required where the work is high-risk construction work — for example a risk of a fall of more than 2 metres from a scaffold or into a stairwell, or likely disturbance of asbestos when removing old linings. Many builders ask for one regardless.

Are mobile scaffolds covered?

Yes. Set-up, inspection, moving the scaffold and working from it are written into the activities, including castors locked and no one on the scaffold while it is moved.

How much does it cost?

Your first SWMS is free. Every SWMS after that is $19.99 inc. GST, paid before it is generated, with up to 3 revisions included. No subscription.

Related: Tiling SWMS · Painting SWMS · Carpentry SWMS

Builder asked for a SWMS by tomorrow?

Describe the job tonight and it's in your inbox in minutes. First one free.

Start my free plastering SWMS arrow_forward