SWMS for Confined space
Confined space SWMS for pits, tanks, vaults and ceiling voids.
Work in or near a confined space is high-risk construction work. Before anyone enters, the WHS Regulations require an entry permit, isolation of hazards, atmospheric testing, a standby person and a rescue plan. The SWMS sets out that sequence for the space you are entering. Describe the space and the task and the platform writes it.
- First SWMS free, no card
- Word document in about 5 minutes
- $19.99 inc. GST after that, 3 revisions included
High-risk construction work this SWMS usually covers
- 6 Work in or near a confined space
- 12 Contaminated or flammable atmosphere
Categories per the model WHS Regulations, s 291 (OHS Regulations 2017, r 322 in Victoria). You confirm which apply when you describe the job.
What goes in it
Typical activities, in the order you do the work
- Identify the space, check if entry can be avoided, and complete the risk assessment
- Isolate energy, plant, pipework and inflows — lock out and tag
- Atmospheric testing for oxygen, flammable gases and toxic gases before entry
- Set up ventilation, signage, barriers and rescue equipment
- Issue the entry permit and brief the entrants and standby person
- Enter and carry out the work with continuous gas monitoring
- Exit, account for all entrants, close the permit and remove isolations
Each activity gets its hazards, the controls in hierarchy order (eliminate, substitute, isolate, engineering, administrative, PPE), the residual risk rating and who is responsible.
Key hazards and how they are controlled
Written as controls, not slogans
Oxygen-deficient or toxic atmosphere
Eliminate entry where possible; test before entry and monitor continuously; forced ventilation; supplied-air respirator if a safe atmosphere cannot be kept
Fire or explosion in a flammable atmosphere
Test for flammable gases, no ignition sources, intrinsically safe equipment, hot work only under a separate permit
Engulfment or unexpected inflow of liquid, gas or material
Isolate and lock out all inflows, drain and purge, verify isolation before the permit is issued
Entrant unable to get out unaided
Trained standby person outside at all times, communication system, rescue equipment set up before entry, rescue plan rehearsed
Who asks for it
Set out the way builders' safety teams expect
Principal contractors, utilities, councils and facility managers require it before entry to pits, tanks, sewers, plant rooms and similar spaces.
- verifiedSite address, PCBU, supervisor and contact details on the front page
- verifiedHRCW checklist ticked for the work actually being done
- verifiedYour state's WHS legislation and Codes of Practice referenced
- verified5×5 risk matrix, hierarchy of controls, emergency response and nearest hospital
- verifiedConsultation and sign-on sheet for the crew
See the output first
Email me a sample SWMS
A full 14-page example as a Word document, so you can see exactly what you'll get before you start.
Questions about a confined space SWMS
What makes a space a confined space?
Under the WHS Regulations it is an enclosed or partly enclosed space, not designed to be occupied by a person, at atmospheric pressure, with a risk from atmosphere, contaminants, engulfment or similar. Many pits, tanks and voids qualify. Your SWMS should state why the space is or is not a confined space.
Does the SWMS replace the entry permit?
No. A confined space entry permit is required for each entry. The SWMS covers the method; the permit records the isolations, test results and who is entering, and the SWMS references it.
How much does it cost?
Your first SWMS is free. Every SWMS after that is $19.99 inc. GST, paid before it is generated, with up to 3 revisions included. No subscription.
Related: Plumbing SWMS · HVAC / Air Conditioning SWMS · Trenching SWMS
Builder asked for a SWMS by tomorrow?
Describe the job tonight and it's in your inbox in minutes. First one free.
Start my free confined space SWMS arrow_forward